Racks

Replaces stock Streamliner foot to adapt any Streamliner rack (sold separately) to fit onto standard 10mm nutted wheel axles. Ideal for fixies, cruisers, urban bikes and traditional bikes without eyelets. CONSTRUCTION • Aluminum ADDED BENEFIT • Makes the Streamliner rack (sold separately) even more versatile

Boost the carrying capacity of your Topeak MTX BeamRack (sold separately) with their Dual-Side Frame. It enables you to attach panniers and other Topeak MTX bags to your BeamRack.

- Extra rigidity from triangulated rear strut safety design - carries the load like an extension of the frame - Extra-long connector arms and adjustable height legs for increased fit versatility - Flat-packed to save space - All-aluminum tubing construction is lightweight but strong enough to handle 40lbs - Stainless steel nuts and bolts

Planet Bike's Eco Rack is made of oversize tubular 6061-aluminum for maximum strength and stability. It's designed to provide complete heel clearance when you install packs. And, the pre-installed rack hardware makes it a cinch to mount the Eco Rack to your bike, too. This rack fits most road, mountain and hybrid bicycles and even includes a built-in platform, which doubles as a mini-fender on rainy rides.

- Replacement and/or additional rack for a second bicycle - Aluminum construction - Works with the BS-1 and BS-2 child carriers

Take your bike adventures even further with a versatile mount cage to pack larger gear on your bike. The included tie-down straps provide the ability to carry a DryBag, sleeping bag/pad, stuff sack, or any round shaped gear on your bike frame or fork with bottle bosses. A four-hole mount design offers height adjustment of your load for better balance. VersaMount clamps also provide easy installation and flexible mounting options. - Fits tubes 20-60mm. - Engineering grade polymer - 64 mm mounting height adjustable - Weight: 128g - Max load: 3kg / 6.61lb - Dimensions: 22 x 12 x 7cm / 8.7 x 4.7 x 2.8-inches

Swapping your Giant Progeny Child Carrier from one bike to another is easy with the Progeny Child Carrier Rack Kit. It includes a rear rack and all the hardware you need to install.

Axiom's Transit Rack is your trusty friend when it comes to hauling gear. It's tough, it's light and it can hold panniers. Use it to commute, tour or just head to class. It handles heavy loads easily and acts a fender as well.

Front Rack designed for the Denago FAT Tire eBike Front Rack 15lbs MAX capacity Bolts directly to braze-on on frame Matte Black Finish

Rear Rack designed for the Denago FAT Tire eBike Rear Rack 50lbs MAX capacity Bolts directly to braze-on on frame Matte Black Finish COMPATIBLE ONLY on DENAGO FAT Tire eBike

Wald bicycle racks offer a simple rear rack design for easy use. Lightweight, yet sturdy construction with simple mounting points located at eyelets near the rear axle and the brake mount. The 215 works perfectly with Wald's innovative 582 rear folding basket. - Simple design for easy use - Lightweight, yet sturdy - Steel rack w/adjustable brake bolt mount - Loading surface = 13" x 5" - Lightweight at just over 2 pounds

The one-stop solution for finding the perfect rack. Born from the versatility of Blackburn's Fat Bike Rack, the Local Deluxe Rack is a scaled down version that adjusts in height and width to fit a variety of bikes. Details: - Adjustable height and width to fit almost any wheel size - No bending or rigging of hardware required - Disc brake compatible - Center 'top deck' keeps your jeans clean - Includes universal mounting hardware - Accommodates maximum tire size up to 29x2.3 - Maximum width adjustability up to 155mm - 45 lb/20.5 kg capacity - 990g

Giant's Alloy Rack is light, durable and boasts a center platform, which helps support loads up to 50 lbs. It acts as a partial fender and features a mount for a reflector or taillight (sold separately). This great rack is perfect for carrying panniers and bags (sold separately).

Topeak's Explorer Tubular Rack is a great add-on for carrying a trunk bag, pannier or anything else you want to strap on. It's made of tubular aluminum, fits most bikes, and has a center strip that acts like a short fender, too.

Axiom's Journey DLX Lowrider Front Rack is super light and super durable. This is perfect when you're way out in the middle of nowhere or just running errands, when every gram counts and gear failure is not an option. This rack is more than just strong, cornering clearance is exceptional due to the increased height, and it's still able to handle large, heavy panniers (sold separately). Additional looped struts keep the panniers steady and there are even safety tabs to prevent your bag hooks from accidentally sliding off.

Denago Commute Rear Rack FITS ONLY LG/XL Top Tube.  Custom design and fit.  Easy to mount and use!  Other racks for other sizes. COMPATIBLE ONLY with COMMUTE E18 Top Tube LG/XL frame size

Denago Commute Rear Rack FITS ONLY SM/MD Top Tube or Step-Thru.  Custom design and fit.  Easy to mount and use!  Other racks for other sizes. COMPATIBLE ONLY with COMMUTE E13/18 SM/MD frame size

Extend the capabilities of your ebike by adding a rear rack. With a rack in place, you can add panniers, a rack top bag, or a basket. Perfect for commuting to work or school, grocery runs, or bringing lunch along on your rides.  This rear rack fits Denago City Model 1 top tube (step-over) and step-thru eBikes. aluminum construction includes mounting hardware

Blackburn's EX-1 rack does everything. Built for maximum durability of 9mm aircraft-grade 6061-T6 aluminum, this rack features a 3-strut design to control the load and is compatible with Copilot child seats (sold separately). It fits most bikes.

Giant's Rack-It Beam Seatpost Rack is light and durable so you can haul your gear without being weighed down. It boasts a center platform that supports loads up to 22 lbs and acts as a partial fender. The quick release attachment makes it easy to remove when not needed and a sliding cargo tray allows you to carry bulkier items. There's also a mount for a reflector or taillight (sold separately).

- One size fit all frames sizes - Easier, user-friendly assembly - 13MM alloy frame - Maximum load rating of 15kg - Pannier bag compatible

- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061-T6 alloy construction - 625g - 55lb weight capacity

Topeak's Disc-Mount Rack allows you to easily mount your BabySeat II or your Topeak MTX TrunkBags (both sold separately) to your bicycle. And, this tubular aluminum rack features tabs that clear most disc brake mounts so you can use your disc brake-equipped bike to run errands with your favorite little passenger or extra storage room.

Axiom's Journey Rack is made of light, rugged aluminum. It is specially designed to handle even the largest and heaviest panniers (sold separately) with additional looped struts that prevent the bags from swinging into the wheel. It also has a platform on top, which adds strength and doubles as a mini fender.

Gear up and go long. Axiom's Journey Suspension & Disc Lowrider Front Rack gives you lots of extra carrying capacity. Designed for bikes equipped with front suspension bike and disc brakes, the Journey Suspension rack installs easily and assures excellent clearance so your load doesn't interfere with your bike's functions. With increased height for improved cornering and ground clearance, the Journey is perfect for going deep into the backcountry. It is made of light, rugged aluminum and handles heavy panniers (sold separately) with ease.

Topeak's Explorer Tubular Rack is a great add-on for carrying a trunk bag, pannier or anything else you want to strap on. It's made of tubular aluminum, fits most bikes with disc brakes, and has a center strip that acts like a short fender, too.

- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061 T6 alloy construction - To be mounted on bikes with disc brakes - 625g - 55lb weight capacity

- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061-T6 alloy construction - Spring clip for additional cargo security - 800g - 55lb weight capacity

Topeak's Explorer Tubular Rack is a great add-on for carrying a trunk bag, pannier or anything else you want to strap on. It's made of tubular aluminum, fits most bikes with disc brakes, and has a center strip that acts like a short fender, too. Plus, it comes with a spring that folds up to clamp securely onto books, magazines and other thin objects.

A lighter duty version for MTB and commuter use. QR mechanism is secure and easy to use. 7 kg (15 lb) carrying capacity. Compatible with all MTX TrunkBags. Includes hidden storage tray, rubber bungee and safety reflector. - Clamp: Fits 25.4/31.8 mm (shims Incl.) - Bag Compatibility: MTX TurnkBags - Material: Aluminum beam / Plastic cargo deck - Max Weight Capacity: 7 Kilograms - Size: 51 x 12.5 x 9 cm / 20.1” x 4.9” x 3.5” - Weight: 688 grams

Axiom's Streamliner Road DLX Rack is designed to fit on road bikes that don't have eyelets. It's made of reliable, light aluminum, features struts to keep loads from getting close to the rear wheel, and offers ample heel clearance when you're carrying panniers.

Topeak's Explorer Tubular Rack is a great add-on for carrying a trunk bag, pannier or anything else you want to strap onto your big-wheeled bike. It's made of tubular aluminum, fits most bikes with disc brakes, hauls up to 55 pounds and has a center strip that acts like a short fender. It's compatible with Topeak's QuickTrack bags and accessories (sold separately), too.

- Specifically designed for 29" mountain bikes and larger volume 700C wheels - Compatible with bike frames equipped with disc brakes - Tubular aluminum rear rack for loaded touring - MTX 2.0 QuickTrack compatible with all MTX Trunk Bags or MTX rear baskets - 6061 T-6 hollow aluminum - 55lb weight capacity - 680g

- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061-T6 alloy construction - Spring clip for additional cargo security - Designed for compatibility with disc brakes - 800g - 55lb weight capacity

Axiom's Journey Adjustable 2429 Rack is made of light, rugged aluminum with vertically adjustable stays meaning it mounts on a wide range of rear wheel sizes. It handles even large, heavy panniers (sold separately) with additional looped struts that keep your panniers steady. There also is a platform on top, which adds strength and doubles as a mini fender.

• Tubular 6061-T6 aluminum construction • Three-position mid-blade mount for improved fit • Large pannier hook stops • Powdercoat finish • Maximum recommended load 33lbs (15kg) • Requires inner and outer mid-blade eyelets

Features - E-Bike Specific Rack utilizing Giant's Proprietary Smart Mount System - The usage of a fender bracket (Rack-It Metro E - Fender Bracket) is required when installing this rack Fits: - Quick-E + (2016+) - Road-E + (2016+) [Does not fit Road-E + Pro] - Dirt-E + (2016+) [Does not fit Dirt-E + Pro]

Topeak's MTX BeamRack is an awesome way to add touring capacity to bikes that won't accept conventional racks, such as dual-suspension mountain bikes. The quick-release mount clamps firmly to your seatpost and this rugged rack boasts durable aluminum construction capable of supporting up to 20-pounds with ease.

This heavy-duty steel rear rack is made for towing Burley trailercycles. Pick up an extra to easily switch your Piccolo or Kazoo trailercycle between multiple bikes. The Moose Rack includes rack stays and hardware to mount to your bicycle.

Lightweight aluminum tubing, stainless steel hardware, and fully adjustable upper stays make the Pork Chop rack a durable addition to any bike. - Fits most 700c cantilever and disc brake bikes - Tubular aluminum construction, 10mm diameter - Stainless steel hardware - Fully adjustable upper mounting brackets - W-bend at bottom of rack for easy on-and-off of hook-style panniers - Platform Dimensions: 10.75 x 4.88" - Weight: 650g - Weight Limit: 40 lbs.

A disk brake compatible update of the original rear rack design where it all began for Blackburn in 1975. - Mounting system works with disc brake frames and bikes lacking rear dropout rack mounts - Lower mounting points attach to included extra-long QR skewer - Three strut design for maximum load control - 12mm gauge aircraft-grade aluminum rod ensures long lasting durability - Fits both wide and narrow tire - Fits 26" and 700c frames - Compatible with Copilot child seats - 535 grams - 40lbs/18.2kg carrying capacity

Make your fat bike a load-hauling master with Axiom's Fatliner. It's disc compatible, and it's made from rugged 6061 T6 aluminum to keep strength to the max and weight to a minimum. There are plenty of mounting options to accommodate all sorts of fat bikes, and it fits dropouts from 170 to 190mm apart. Get fat, get loaded, and go adventure with the Fatliner.

Axiom's Journey Uni-Fit MK3 ALU Rack is made of solid, hand-welded 10mm aluminum tubing. The Uni-Fit modular foot design provides adjustable setback and height so the rack is compatible with an extraordinarily wide range of bicycle frames, wheel sizes and geometry types. This rack is specially designed to handle large, heavy panniers (sold separately) with additional looped struts that stabilize the bags and let them mount lower for additional stability.

Ideal for daily essentials, about-town errands, and weekend tours, Thule's Pack 'n Pedal Tour Rack is a quick and easy solution for almost every bike, from fully rigid hybrids to full suspension mountain bikes. The unique attachment system secures to your bike in a flash, and fits on either your fork or your seat stays. Once attached, it's silent, secure, and safe for any frame material. The Tour Rack includes side rails so you can mount panniers to increase your carrying capacity.

A sturdy steel rack which allows for mounting Thule Yepp Maxi Easyfit and Thule Yepp Nexxt Child Bike seats. Features - Compatible with most 26" city and hybrid wheeled bikes - Supports up to 35Kg/77 lbs

This one-size-fits-all aluminum tubular rear rack is designed exclusively for Fat Bikes with disc brakes. The rack legs are adjustable to fit most 24” & 26” wheel Fat Bikes. The integrated side bar provides a lower pannier attachment point allowing more space for cargo on top of the rack. The MTX QuickTrack plate is compatible with any Topeak MTX TrunkBag, MTX rear basket, and most other rack packs and panniers on the market. Not compatible with asymmetric rearstay design fat bike frames.

The ultimate bike rack! The Ortlieb Rack Three offers you the right solution, whether you're on your way to work, the grocery store, or around the world. One unique advantage of this all-purpose bike rack is its compatibility with all Ortlieb attachment systems. Outfitted with convenient mounting elements for the QL3 and QL3.1 systems, the Rack Three allows you to attach all Ortlieb bags directly to your bike without any other modifications. If you want to use the Rack Three exclusively for your QL2.1/2/1 bags, you can easily remove the attachment elements for the QL3.1/QL3 and thereby create even more space for your panniers. The Rack Three's double-rail design allows you to attach all bike bags with a QL2.1, QL2 or QL1 system to a top level or a lower level. Selecting the lower level gives you the option of simultaneously attaching a bike basket or a Trunk-Bag to the top of your bike rack and expanding your overall stowage space. Rack Three is suitable for bicycles with wheel sizes of 26" and 28". - City and touring aluminum rack with two mounting levels - For wheel size 26"/28" (1 size) * Width of support surface 120 mm - Compatible with all Ortlieb mounting elements (QL1, 2, 2.1, 3 or 3.1 system) - With three integrated QL3/QL3.1 mounting elements on each side - Further mounting components are not required for QL3/QL3.1 bags - Suitable for direct mounting of QL3/QL3.1 products (e.g Back-Roller Urban, Single-Bag, Office-Bag, Downtown Two, Vario, City-Biker, Commuter-Bag) - QL3/QL3.1 lock heads can be easily removed for fixing panniers with QL1, QL2 or QL2.1 system; dummy plugs for borings included - Second mounting level for simultaneous use of pannies on sides and basket or Trunk-Bag on top - Mounting for optional rear light (not included) - Maximum capacity: 30 kg/66 lbs.

The Down Under HD Rack is the recommended lowrider for world touring. Sturdy and dependable, the steel construction lends itself well to field repairs should a worst-case scenario occur. - Requires dual-sided, mid-blade mounts - Wide crossbars provide sturdy, secure attachment points for a pannier - Tubular 4130 CroMoly construction - Mounting system provides 35mm range of infinite adjustment to position the rack - Includes mounting hardware kit - Powdercoat finish - Maximum Recommended Load: 55lbs (25kg) - Sold in pairs - Requires inner and outer mid-blade eyelets

The Alternator Rack 190 is the rear rack solution for all Salsa 190mm-spaced Alternator dropout equipped frames. Load up your panniers, get off the beaten track, and start exploring! - NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points - NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts - Tubular AL-6061-T6 construction - 135 x 325mm cupped deck - Extra-long struts for improved range of fit. Straight and shaped (kinked) struts included - Large pannier hook stops - Black powdercoat finish - 15kg maximum recommended load - Mounting kit included - 765g

The Alternator 135 Low Deck fits Salsa 135mm-spaced, Alternator dropout equipped frames using a non-plus-sized tire. It features a lower and narrower deck that fits better over and around tires up to 29 x 2.1" (without fenders), as well as 700c and fender setups. - NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points - NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts - Tubular 6061-T6 aluminum construction - 135 x 345mm cupped deck - Extra-long struts for improved range of fit; straight and shaped (kinked) struts included - Black powder coat finish - 765 grams - Weight Limit (lbs): 59.5 lbs.

Set out on an adventure with Salsa's Alternator Rear Rack. Built for 135mm-spaced dropouts, this rack is constructed of sturdy, light 6061 aluminum and finished with a black powder coat. The Alternator features large pannier hook stops, extra long struts for an impressive fit range and it includes a mounting kit.

Set out on an adventure with Salsa's Alternator Rack. Built for 170mm-spaced dropouts, this rack is constructed of sturdy, light 6061 aluminum and finished with a black powder coat. The Alternator features large pannier hook stops, extra long struts for an impressive fit range and it includes a mounting kit.

The Salsa EXP Series Anything Cradle is a bracket-mount handlebar roll system that holds gear in front of your handlebars without kinking your cables. This modular system is designed for use with our EXP Series Side-Load or Top-Load Dry Bags, or you can use your own dry bag. The Anything Cradle allows you to distribute your gear evenly, which is essential to any well-balanced bikepacking setup. - Includes Anything Cradle and two 30" Salsa EXP Series Rubber Straps - Salsa EXP Series Rubber Straps are made of non-slip TPU to hold gear securely - Anything Cradle Arms are compatible with 35.0mm handlebars or 31.8mm handlebars (with included shim) - Nylon 6/6 composite cradle, 6061 forged aluminum arms - Maximum load weight: 8 lbs. (3.6kg)

Patented rack attachment system works on virtually any bicycle from full-suspension mountain bikes to commuters and everything in between. - Patented attachment system secures easily - Tough construction allows for variety of rugged riding uses - Silent and vibration free performance - Includes rails for mounting panniers - Works on the rear seat stays and front fork - Works with any type of frame material

The perfect quick-mount front rack system for MTB suspension forks or rigid forks without rack eyelets. This one-size-fits-all front rack features an innovative top plate that adjusts to levels independently from the fork angle. Integrated QuickTrack system allows Topeak TrunkBags to slide and lock into place and release with a the push of a button. Innovative hook-and-loop-strap mounting system cinches down tight to keep the load stable and allows mounting on a wide range of bikes. Also compatible with KLICKfix / RackTime Snapit or Vario system bags. - Attachments: Fork with hook-and-loop straps - Adjustment: Strut slots - Material: Aluminum / Engineering grade polymer / Nylon straps - Compatibility: Topeak MTX / RX TrunkBags, RackTime Snapit / Vario system bags - Max Load: 10kg / 22lb - Clamp for front reflector - Size: 37. 4 x 32.2 x 16.5cm / 14.7" x 12.7" x 6.5" - Weight: 910g / 2.01lb

Load up and go! Salsa's Wanderlust HD Rear Rack is built from chromoly steel for real-world strength. A large deck teams up with multiple cross bars for securing panniers and other gear. To get you going, a mounting kit is included, and to help you stay visible, there's also a taillight mounting bracket.

Surly Racks are well-thought-out, durable, expedition-worthy racks that work with most panniers. While their racks aren't limited solely to heavy duty touring, that is what they were designed for. When you're out on the road, the best option is to never ever have anything ever go wrong ever. Right? That's never a guarantee though; so having something that you can repair if it does break can be pretty clutch. Thus, the main bodies of Surly's front and rear racks are made from tubular CroMoly steel with stainless hardware. This means you can probably find someone out there that can torch it back into one piece in the rare instance things go south. The Front Rack is height adjustable and provides either a low or high pannier mounting position, which can be handy depending on terrain. When the ground gets rough, keep your gear high and dry. When the path is smooth and easy, you can load things low and keep everything balanced and stable, with the platform above the wheel providing yet more space for more stuff. It's worth mentioning they've redesigned the Front Rack hardware to be simpler to attach and more compatible with things like disc calipers and fenders. Surly also made attachment plates specifically for their Uni-Crown forks for yet more fork compatibility. This simpler design has fewer moving parts and costs less to manufacture; ergo, costs less for you to purchase. Surly's front rack WILL work with disc brakes on the Troll, Ogre, and Disc Trucker frames. It may take a bit of work to get clearance around the front caliper since the many different calipers out there are many different shapes. The new attachment plates will limit any DIY ingenuity you might need, but if you need to throw a washer or three behind the lower left bolt where the plate attaches to the fork dropout, that's not a big deal. As part of Surly's ongoing effort to make this planet last a little longer, they recently started shipping their racks with a small, reusable Surly Tool Bag that houses the rack struts and hardware. This switch helps eliminate the use of some polybags, thereby minimizing excess waste. Plus, you get a free tool bag out of the deal. Surly Front Rack will haul up to 32kg (70 lb) of well-secured, well-balanced gear over roadways and maintained off-road trails. Front Rack specifications: - Tubing diameter: 10mm - Platform dimensions: 230 x 170mm - Weight: 1382g