$15.99 - $19.99
This mid-rise handlebar provides smooth lines and pure comfort - Black powder coat - 1"(25.4mm) clamp, 5.25" rise, 27" wide - Handmade in Maysville, Kentucky
Forged aluminum construction with a retro curved design.
$22.99 - $24.99
Sunlite's Road Handlebars are a light and comfortable addition to your road bike or gravel grinder. At 310 grams, this aluminum bar keeps your rig light while providing plenty of stability while cornering or sprinting for the hole shot. The classic road bend gives your bike a svelte look, too. And with plenty of widths to choose from, you get a bar that's tailored to your build and riding style.
Think about it: there are only 3 contact points on a bike, you'd better make each one as comfy as you can. Salsa makes it easy with the Short & Shallow bar. Perfect for smaller riders with smaller hands, the Short & Shallow bars feature slightly shorter reaches and drops. The tops boast hand-friendly, ergonomic tops and the drops have long extensions for extra hand placements. The angles are perfect for modern integrated levers and have double-groove cable routing that's Campy, SRAM and Shimano compatible.
- Butted 6061 aluminum - Double butted 6061 alloy - 35mm rise - 9 degree sweep - Width: 670mm - 25.4mm center section
$79.99 - $84.99
Your favorite bars just got bigger, wider, and lighter, Go figure? The magic of 35—believe the hype! Increasing the bar diameter to 35mm allowed Race Face to shave material from the bar resulting in a dramatic reduction in overall weight while retaining the proven stiffness, strength and performance Race Face bars are known for. The ATLAS 35 bar also expands to an 800mm width (Can be trimmed down to 750mm) for hyperspeed control, can you handle it? - Proven design and durability of the Race Face Atlas bar, with increased stiffness and reduced weight of the 35mm bar platform - Requires 35mm bar clamp diameter stem - Full 800mm width that can be trimmed down to a minimum 750mm - 8 degree rearward sweep, 5 degree upward sweep
T1 Plus Aluminum Aerobars with a double-ski bend shape allow riders to get in a lower rider position, minimizing drag, and allowing for more power output with a neutral hand position. - 6061-T6 Aluminum construction; shot peened with anodized finish - J2 Bracket: The extension bracket, isolated from the basebar bracket, allows for a wider range of armest adjustment possibilities. Easily adjustable in length and angular rotation for a customized fit. - F-19a Aluminum Armrest: 4 position fore/aft adjustment along with 15° of rotational adjustment to dial in the fit. Velcro-backed EVA Foam pads affix directly to armrest without additional straps. - Ability to increase stack up to 80mm with optional Aerobar Bracket Riser Kit. Tech specs: - Stack: 60mm-120mm - Reach: Max Aft -180mm, Max Fore 70mm - Extension Adjustment: 155mm-290mm (C of basebar-End) - Width: 145mm-300mm (center to center) - Center Clamp Diameter: Fits 26.0mm and 31.8mm bars - Color: Anodized Matte Black - Weight: 503g
Profile's T1+ Clip-on Aerobars feature Stryke-bend extensions with length, width and arm-rest adjustment so you can easily achieve your perfect aero position. The 6061 aluminum extensions keep weight down, while the forged brackets provide strength exactly where you need it. You'll get fast and stay there thanks to J2 brackets for an adjustable lower arm position, giving you an edge over your competition whether it's other racers or your own personal record.
$39.99 - $40.00
Profile's Ultra FR is a tough riser bar that gives you extra control in technical sections and confidence on rough descents. It's made of double-butted 6061-T6 aluminum, which offers superior strength and stiffness and weighs next to nothing.
- Ideal for fitness and comfort cyclists - A great replacement handlebar
- Ideal for fitness and comfort cyclists - A great replacement handlebar
Giant's Connect XC Flat Handlebars are engineered from aluminum and feature a 5° upward sweep, perfect for those cross-country rides.
Giant's Contact SL Road Handlebar is made from a lightweight, tough 2014 aluminum. It features a dual radius drop and ovalized top profile in six sizes for an ergonomic fit. Plus, it's compatible with clip-on aerobars (sold separately).
- Ultra-Light High-Performance Full-SLR Composite Construction Makes For Maximum Stiffness And Lowest Possible Weight - 9° Rearward/ 0° Upward Sweep - Micro-Adjust Set-Up Markings - Not Compatible With Bar Ends
Made of sturdy steel, Electra's Cruiser Bullhorn Handlebar adds sweet style to any bicycle. With a wide sweep for comfort and stability, the Bullhorn adds more than just good looks to your cruiser.
Enjoy the classic style of Electra's Townie Original/Balloon Aluminum Handlebar when it's mounted to your favorite cruiser. It's got enough rise to keep you in an upright riding position, and just enough backsweep to keep your hands comfortably positioned for stability and control.
Easton's EA70 Aero Road Handlebar offers awesome strength, low weight and superb control for your road bike. It's constructed from aluminum with TaperWall technology that puts material where you need it and none where you don't. Plus, its ergonomic bends put you in a natural, efficient riding position, while the bar’s double-groove design provides flush cable routing for a clean look and a comfortable grip.
Easton's EA70 Road Handlebar offers awesome strength, low weight and superb control for your road bike. It's constructed from aluminum with TaperWall technology that puts material where you need it and none where you don't. Plus, its ergonomic bends put you in a natural, efficient riding position, while the bar’s double-groove design provides flush cable routing for a clean look and a comfortable grip.
For cross country and all-mountain riding, Dimension Mountain bars provide generous—but not ridiculous—width, rigorously tested to ISO 4210 Mountain standards. - Shot-peened finish - 6061-T6 Aluminum - 9-deg backsweep - 720mm wide - 35mm rise
Dimension Road handlebars are available in 25.4 and 26.0mm clamp diameters and have double grooves for cable routing.
Dimension's Urban Cruiser Bar is a great way to customize your ride. Available in a variety of configurations to suit your needs and style. - Material: Aluminum - Lever Compatability: Mountain 22.2mm
Bontrager's Race VR-S Road bars are the ultimate compact bars with the perfect balance of strength, lightness and above all, fit. The shallow drop and short reach allow smaller hands to easily reach the levers. Plus, these fine road bars are made of custom-butted, shot-peened 6061-T6 aluminum for excellent stiffness and durability. And, you'll love their Bontrager Compact Variable Radius bend which feels great in the hands, while the etched positioning lines on the sides make lever placement a breeze.
A true all-rounder’s set of bars, Zipp’s Contour SLs are comfortable, aerodynamic, and light. The airfoil tops to cut through the wind and give you an ergonomic grip on long climbs. Deep grooves keep the cables completely hidden from the wind and your grasp, while ovalized drops fit your hands perfectly; a weight of just 190 grams doesn't hurt either.
Zipp's SL-70 Aero is, in every way, a high-performance bar. This unidirectional carbon handlebar is packed with innovations for best-in-class fit, ergonomics and aerodynamic performance. With its wing-shaped bar top, the SL-70 Aero features Zipp’s most advanced bar refinements while building on the trend-setting aero legacy of the VukaSprint. Beyond aero performance, the SL-70 Aero features a 70mm reach to allow proper fit without compromising stem length and steering control. The 10-degree ramp angle to the brake hoods eliminates the need for up-rotated bars. The bar also provides ample wrist clearance for riding and sprinting in the drops. - Unidirectional carbon construction - Airfoil top bar reduces drag by .63 Newtons over traditional round tube - Drops angled out 4 degrees with 10 degree ramp angle - Features Zipp’s Rapid Routing system, also used in the Vuka Aero system, for easy internal cable routing. UCI legal. - Compatible with all mechanical brake/gear systems and all electronic gear systems. - Not clip compatible.
Light weight, comfort, and strength: The SL-70 Ergo is the ultimate handlebar for long days in the saddle. The SL-70 Ergo improves upon the flat bar top shape of its carbon predecessor, the Contour SL bar, but also with numerous modern features sought after by riders and pro bike fitters. The SL-70 Ergo sports a 70mm reach and 128 drop. The short 70mm reach allows bike fitters flexibility in achieving a comfortable position without sacrificing steering control. The drop utilizes a variable radius, allowing for multiple hand positions and deeper movement into the drop. As a result, reach to the brake lever is shorter. A 3° backsweep on the flat tops keeps the wrist in a comfortable position, essential for long days on pavement or gravel, while the 10° ramp angle provides a smooth transition to modern shifter hoods. Brake and shifter housing is elegantly hidden along the underside of the bar. The SL-70 Ergo weighs only 205g but is strong and durable enough for the demands of aggressive cyclocross and gravel racing. - Unidirectional Carbon built for stiffness, comfort and light weight - Ergonomic top for all-day comfort - Variable radius drop for multiple hand positions and deeper movement into the drop. - 70mm reach - 128mm drop - Variable radius drop - Cable grooves
Zipp's Service Course lineup provides options to match every rider with a high-performance, precise fitting bar. The Service Course 70 Ergo packs a powerful punch of everything you'd want in a bar — a design based on feedback from pro bike fitters and riders, an ergonomic top section, and a price you'll love. - 6061 aluminum for light weight and durability - 70mm reach and 128mm drop for a short-low position - Flattened top shape to better fit the hand - Clip-on Compatible - ISO 4210 compliant. See Declaration of Conformity for details.
Zipp's stalwart Service Course 80 handlebars now have an option for those who prefer an ergonomic flat top. The new Service Course 80 Ergo retain the same 80mm reach and 125mm drop of the existing Service Course 80 bars, perfect for a rider looking for a medium reach and shallow drop who likes reaching down to, rather than into, the drops. New is the flattened bar top and a 3° backsweep for a neutral wrist position on the tops. The bars feature a 7° ramp angle for a flat transition to the hoods and a 4° outsweep at the drops. In addition to the ergonomic benefits, the Service Course 80 Ergo are Zipp's first ergo bars to be clip-on compatible. The Service Course 80 Ergo bar uses 6061 aluminum to tip the scales at 315g for a 42cm-wide bar and comes in a Bead Blast Black finish. Light weight, stiffness, and comfort: the Zipp Service Course line provides the right fit for all rider types. - 6061 aluminum for light weight and durability - 80mm reach and 125mm drop for a medium-high position - Flattened top shape to better fit the hand - Clip-on Compatible - Di2 RS910 junction compatible - ISO 4210 compliant. See Declaration of Conformity for details. - Flat transition to hoods - Short reach to brake levers - 3° backsweep for wrist comfort - Anatomic drop shape - Flattened top shape to better fit the hand
Position versatility makes Zipp’s Service Course 80 bars an instant favorite. The drops are kept close and within reach, and because they’re angled outwards by 4 degrees, your wrists remain in a strong, natural position. This lets you get low and aero without compromising comfort or control. Zipp left the transition from the tops to the brake hoods flat so you can ride comfortably, even in a more upright position. Stiff for uncompromising strength, these aluminum bars are ready for anything.
The same compact reach and drop dimensions as the Service Course SL-70 with a flattened top section for a natural ergonomic grip on the bar tops. A revised ramp angle for proper fit. The SL-70 Ergo's specially tuned drop shape creates comfortable hand positions with a short reach to control levers vital for race situations. The bar's 70mm reach is the shortest of Zipp's new Service Course lineup. Its 128mm drop helps put the rider low and in control without compromising comfort. Whether it's a rider with smaller hands or a bigger rider getting aero by pairing this bar with a long stem, this bar helps put just about any cyclists into his or her optimal position. - 7050 aluminum for light weight and durability - 70mm reach and 128mm drop for a short-low position - Flattened top shape to better fit the hand - Clip-on Compatible - ISO 4210 compliant. See Declaration of Conformity for details. - Ramp angle: 10° - Outsweep: 4° - Backsweep: 3° - Drop shape Variable - Clamp width: 110mm
The Service Course SL-70 is the bike fitter's go-to bar. The short reach to the hoods allows a proper fit without compromising stem length and steering control. With the revised ramp angle, proper fit is now achievable on even the most challenging setups. The 70mm reach is the shortest of Zipp's new Service Course bars, at 128mm of drop. Whether it's a rider with a shorter torso or a bigger rider getting aero by pairing this bar with a long stem, this bar helps put just about any cyclists into his or her optimal position. The SL-70's flattened top provides a better fit to the hand and is clip compatible. - 7050 aluminum for light weight and durability - 70mm reach and 128mm drop for a short-low position - Flattened top shape to better fit the hand - Clip-on Compatible - ISO 4210 compliant. See Declaration of Conformity for details. - Ramp angle: 10° - Outsweep: 4° - Backsweep: 0° - Drop shape Variable - Clamp width 120mm
Page 1 of 8 Next page