Wheels

Taiwan Hub Cone Kit is a 26-piece cone assortment for 9.0mm & 10.0mm axles in a convenient plastic storage box. Kit Contains: - (8) CN-R081 - (4) CN-R082 - (4) CN-R083 - (4) CN-R084 - (2) CN-R085 - (4) CN-R086

125 piece assortment of precision machined axle spacers (0.5mm to 5mm thickness). - Outside Diameter of Spacers: 16mm - Inside Diameter of Spacers: 10mm Kit includes: - (10) - 0.5mm thick spacers - (30) - 1mm thick spacers - (30) - 2mm thick spacers - (25) - 3mm thick spacers - (15) - 4mm thick spacers - (15) - 5mm thick spacers

Shimano Hub Cone Kit is a 26-piece assortment in plastic storage box. Kit contains: - (2) CN-R002 - (2) CN-R024 - (2) CN-R036 - (4) CN-R040 - (2) CN-R055 - (4) CN-R060 - (1) CN-R063 - (2) CN-R096 - (1) CN-R097 - (1) CN-R098 - (2) CN-R099 - (2) CN-R102 - (1) CN-R108

WeThePeople's Supreme Hub Guards are made of low-friction nylon fiberglass. Simply replace the cones on your Supreme Front and Cassette Hubs for a perfect fit without having to spread your dropouts. Available for both front and rear. These guards now feature a heat-treated chromoly insert for longer life.

Did you trash the bearings on your WTP Supreme rear hub? It's okay, that just means you're going big enough to make it count. Fear not, we've got you covered with this bearing set from WeThePeople.

Did you trash the front bearings on your WTP Supreme front hub? It's okay, that just means you're going big enough to make it count. Fear not, we've got you covered with this bearing set from WeThePeople.

Did you trash the front bearings on your WeThePeople Arrow front hub? It happens, that just means you're riding a lot. Fear not, we've got you covered with this bearing set from WeThePeople.

Simply replace the cones on your Supreme front and cassette hubs for a perfect fit without having to spread your dropouts. Available in front, rear, and drive side options. These guards now feature a heat-treated chromo insert for longer life.

This is an axle and cone set for WTP Supreme hubs. Pop this in to freshen up that bombed-out hub after too many aerial ghost rides.

Get your WeThePeople Arrow Front Hub Axle/Cone Set and freshen up that front end that's a little wobbly after that last time you cased it on the spine.

Supreme Rear Hub 14mm Female Bolts

The Logic rim uses a wider 35mm profile with a thick sidewall, which makes the rim strong and resilient to sideways impacts that can happen from anything between under-rotating a flair or over-rotating a hard 360 out of a rail. - Very strong reinforced spoke hole design - Extra-thick sidewalls to resist denting under harsh conditions

A few too many drops to flat? Get your Arrow Rear Hub back in solid working order with this replacement axle/cone set from WeThePeople.

WTB's rim strips protect your tubes from rubbing against your rim. They are simple to install and they help reduce the chance of flats caused by friction between the tube and rim.

Make your WTB rims air tight and ready for tubeless use with WTB's TCS Rim Tape. This tape covers the spoke holes and can be used as a lightweight rim tape in any rim. Available in 11-meter (covers 5 rims) and 55-meter rolls (covers 27 rims).

WTB's TCS Brass Valves are your key to the excellence that is tubeless wheels and tires. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch.

WTB's TCS Brass Valves are your key to the excellence that is tubeless wheels and tires. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch.

WTB's TCS AL valves are aluminum to shed grams, and come in catchy anodized red, black, or blue. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch. - Presta - 34mm

WTB's TCS AL valves are aluminum to shed grams, and come in catchy anodized red, black, or blue. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch. - Presta - 46mm

WTB's proprietary 4D spoke drilling prevents binding and lateral loading of the spokes, while the spoke bed itself has been updated to provide a more compatible interface between the spoke and rim. Integration of the all-new Solid Strip on our TCS 2.0 rims delivers the easiest to mount and most reliable tubeless system we've ever made. Features: - TCS 2.0 creates a more robust, easily installed and dependable tubeless system. - A recessed channel along the center of TCS 2.0 rims allows installation of the all-new Solid Strip, which prevents tubeless tape from sagging at the spoke holes and results in a smooth, consistent interface between the tire and rim. - 4D angled spoke drilling eliminates binding and lateral loading, and disperses tension more evenly over a greater area

Built for bashing, whether on a gravity shred sled or fully loaded bikepacking rig, WTB's KOM Tough rims are extruded from top-tier alloy to provide utmost durability at a reasonable weight. Their legendary I-Beam construction has evolved to further reinforce the rim with dual support beams that provide increased strength and stiffness for the world's most aggressive riders. KOM Tough rims are proven on the toughest tracks of the Enduro World Series, depended on for daily trail rides, and trusted while bikepacking in remote regions of the world. Features: - TCS 2.0 creates a more robust, easily installed and dependable tubeless system. - A recessed channel along the center of TCS 2.0 rims allows installation of the all-new Solid Strip, which prevents tubeless tape from sagging at the spoke holes and results in a smooth, consistent interface between the tire and rim. - 4D angled spoke drilling eliminates binding and lateral loading, and disperses tension more evenly over a greater area.

E-bikes add to the riding experience by simply providing more for less. More distance, more laps, more climbs, and more descents. With all those "mores" also comes more weight continually bashing on the components of an e-bike. In order to overcome the increased forces induced by the technological progression of modern e-bikes, we designed our HTZ rims with more material in every area of the rim prole. Every wall of the rim is 25-30% thicker in comparison to those on our standard rims, which we then paired with our proven I-Beam center support to ensure no beating was too great for these rims. All HTZ rims are TCS 2.0 tubeless, feature asymmetrical spoke drilling, and are available in widths ranging from i23 to i35 in order to provide options for e-bikes ranging from e-assist gravel bikes to dual-crown downhill bikes that no longer need a truck to be shuttled. FEATURES: - Capable of withstanding the forces of a modern e-bike. - 4D angled spoke drilling eliminates binding and lateral loading and disperses tension more evenly over a greater area. - Symmetric outer profile provides equal dissipation of impact forces on both sides of the rim while asymmetric spoke hole drilling allows for more even spoke tension and increased wheel strength. - Disc-brake only. - TCS 2.0 Tubeless ready and comes with a preinstalled Solid Strip, which lies beneath the tubeless tape and prevents sagging at the spoke holes, creating a smooth interface between the rim and tire bead. This prevents air from escaping around the bead and therefore requires less air volume and pressure to mount a tire. Solid Strip also protects the airtight tubeless system from being punctured in the case of a broken spoke. TCS 2.0 creates a more robust, easily installed, and dependable tubeless system. USAGE: E-bike

Proterra Light i23 wheels check all the boxes for a fast and light alloy wheelset. The 23mm inner rim width provides the optimal tire profile for adventure road and gravel tires ranging from 30-42mm. Its open-cavity profile features thin, weight-optimized walls that provide the perfect blend of stiffness, resilience, and efficiency. Subdued graphics on a bead-blast finish ensure these wheels won't clash with the colors of your dream bike. We didn't skimp on hubs either. Top-tier EZO bearings, a swift 6-pawl freehub, and 3.7 degrees of engagement provide the look, sound, and feel you expect of a high-end tubeless wheelset. - 23mm inner rim width with 28 spokes laced in a 3-cross pattern - 6069 aluminum alloy rim that is TCS 2.0 tubeless-ready - Sapim Secure Lock 14-gauge alloy nipples minimize rotational weight, while double butted 2.0/1.8/2.0mm J-bend spokes make replacement a breeze. - Tubeless tape, Solid Strip, and black alloy valves are preinstalled, making the wheels ready for tubeless tires the moment they arrive on your doorstep. The TCS 2.0 Solid Strip is a durable strip that lies beneath the tape, prevents it from sagging at the spoke holes, makes it easier to mount a tire, and protects from puncture in the case of a broken spoke. - Center Lock rotor mounts

Proterra Tough i30 wheels keep the trail in check while everything else blurs by in the periphery. Reinforced by our proven Dual I-Beam support, Proterra Tough rims feature a 30mm internal width to provide higher tire volume while also increasing sidewall support at lower pressures. High-quality EZO sealed bearings are designed to endure through seasons of aggressive riding, while a responsive 6-pawl freehub provides the snappy 3.7 degrees of engagement you demand when cranking out of corners. Choose Proterra Tough when you need a wheel that won't let you down. - 30mm inner rim width with 32 spokes laced in a 3-cross pattern - 6069 aluminum alloy rim is TCS 2.0 tubeless-ready - Sapim Secure Lock 14-gauge brass nipples provide bomber durability, while double butted 2.0/1.8/2.0mm J-bend spokes make replacement a breeze. - Tubeless tape, Solid Strip, and black alloy valves are preinstalled, making the wheels ready for tubeless tires the moment they arrive on your doorstep. The TCS 2.0 Solid Strip is a durable strip that lies beneath the tape, prevents it from sagging at the spoke holes, makes it easier to mount a tire, and protects from puncture in the case of a broken spoke. - 6-bolt rotor mounts - Top-tier EZO sealed bearings

Proterra Tough i30 wheels keep the trail in check while everything else blurs by in the periphery. Reinforced by our proven Dual I-Beam support, Proterra Tough rims feature a 30mm internal width to provide higher tire volume while also increasing sidewall support at lower pressures. High-quality EZO sealed bearings are designed to endure through seasons of aggressive riding, while a responsive 6-pawl freehub provides the snappy 3.7 degrees of engagement you demand when cranking out of corners. Choose Proterra Tough when you need a wheel that won't let you down. - 30mm inner rim width with 32 spokes laced in a 3-cross pattern - 6069 aluminum alloy rim is TCS 2.0 tubeless-ready - Sapim Secure Lock 14-gauge brass nipples provide bomber durability, while double butted 2.0/1.8/2.0mm J-bend spokes make replacement a breeze. - Tubeless tape, Solid Strip, and black alloy valves are preinstalled, making the wheels ready for tubeless tires the moment they arrive on your doorstep. The TCS 2.0 Solid Strip is a durable strip that lies beneath the tape, prevents it from sagging at the spoke holes, makes it easier to mount a tire, and protects from puncture in the case of a broken spoke. - 6-bolt rotor mounts - Top-tier EZO sealed bearings

Proterra Light i23 wheels check all the boxes for a fast and light alloy wheelset. The 23mm inner rim width provides the optimal tire profile for adventure road and gravel tires ranging from 30-42mm. Its open-cavity profile features thin, weight-optimized walls that provide the perfect blend of stiffness, resilience, and efficiency. Subdued graphics on a bead-blast finish ensure these wheels won't clash with the colors of your dream bike. We didn't skimp on hubs either. Top-tier EZO bearings, a swift 6-pawl freehub, and 3.7 degrees of engagement provide the look, sound, and feel you expect of a high-end tubeless wheelset. - 23mm inner rim width with 28 spokes laced in a 3-cross pattern - 6069 aluminum alloy rim that is TCS 2.0 tubeless-ready - Sapim Secure Lock 14-gauge alloy nipples minimize rotational weight, while double butted 2.0/1.8/2.0mm J-bend spokes make replacement a breeze. - Tubeless tape, Solid Strip, and black alloy valves are preinstalled, making the wheels ready for tubeless tires the moment they arrive on your doorstep. The TCS 2.0 Solid Strip is a durable strip that lies beneath the tape, prevents it from sagging at the spoke holes, makes it easier to mount a tire, and protects from puncture in the case of a broken spoke. - Center Lock rotor mounts

Proterra Light i25 wheels care for all your Road Plus adventure riders out there. The extra traction and comfort of a high-volume 650B tire is pretty nice, eh? Proterra Light i25 wheels feature an open-cavity profile to minimize weight and maximize efficiency as you get lost on backroad detours. Like all other Proterra wheels, the responsive 6-pawl freehub offers 3.7 degrees of reliable engagement, whether you're cruising to work or have your frame bag bursting at the seams for an overnight adventure. Designed for Road Plus, because more volume is always more fun. - 25mm inner rim width with 28 spokes laced in a 3-cross pattern - 6069 aluminum alloy rim is TCS 2.0 tubeless-ready - Sapim Secure Lock 14-gauge alloy nipples minimize rotational weight, while double butted 2.0/1.8/2.0mm J-bend spokes make replacement a breeze. - Tubeless tape, Solid Strip, and black alloy valves are preinstalled, making the wheels ready for tubeless tires the moment they arrive on your doorstep. The TCS 2.0 Solid Strip is a durable strip that lies beneath the tape, prevents it from sagging at the spoke holes, makes it easier to mount a tire, and protects from puncture in the case of a broken spoke. - Top-tier EZO sealed bearings - Center Lock rotor mounts

CZR i30 wheels were designed to handle it all, which is why they feature a strategically reinforced carbon layup and are hand built using double-butted spokes, brass nipples and high-engagement hubs featuring top-tier bearings and oversized freehub seals to establish themselves as wheels that simply won't quit. Solid Strip & TCS Tape - Durable nylon strip that lies between the rim and tubeless tape to prevent tubeless tape from pushing into the spoke holes and ensures a smooth interface between the tire and rim. The smooth surface makes it easier to mount a tire by preventing air from escaping around the bead at each indent during inflation. Solid Strip also protects the airtight system from puncture in the case of a broken spoke. 3-Cross Lacing & Brass Nipples - Too many companies are trying to save weight by offering "enduro" wheels with 2-cross lacing patterns and inadequate alloy nipples. While those are suitable for XC and light trail usage, there's no replacement for the long-term reliability of a 3-cross lacing pattern with brass nipples holding it all together. Frequency Hub - The world's best carbon rims deserved to be paired with high-quality hubs that further improve the performance of a lightweight, dependable carbon wheelset. Frequency hubs feature a low-drag, 6-pawl design that alternates contact between two sets of 3-pawl groupings to provide a responsive 5 degrees of freehub engagement. Heavy-Duty Pawl Springs - CZR i30 wheels feature heavy-duty pawl springs that engage with greater force to counteract the additional torque caused by sudden cranking on steep trails. We also offer a Light Pawl-Spring Kit that can be purchased separately for CZR i30 riders who prefer a quieter hub with lighter pawl engagement. Usage: Trail, Enduro

CZR i23 gravel wheels are designed to minimize weight while blending stiffness and compliance to maximize power transfer and increase comfort. CZR i23 rims feature a 24mm section depth to maximize energy transfer, reduce weight, improve vertical compliance, and reduce rider fatigue while a hooked bead also improves tire retention with high pressure adventure road and gravel tires. CZR I23 CARBON RIMS Reinforced spoke beds improve overall wheel strength and durability while also minimizing weight in areas where less strength, and therefore material, is needed. CZR i23 rims feature 3mm of asymmetrical spoke offset and a 24mm section depth to improve radial stiffness and maximize energy transfer without being affected by crosswinds like other wheels with deeper profiles. SOLID STRIP & TCS TAPE Durable nylon strip that lies between the rim and tubeless tape to prevent tubeless tape from pushing into the spoke holes and ensures a smooth interface between the tire and rim. The smooth surface makes it easier to mount a tire by preventing air from escaping around the bead at each indent during inflation. Solid Strip also protects the airtight system from puncture in the case of a broken spoke. 2-CROSS OR 3-CROSS LACING CZR i23 gravel wheels with 24 spokes feature a 2-cross lacing pattern to increase radial stiffness and decrease weight. CZR i23 wheels with 28 spokes feature a 3-cross pattern to increase durability while still providing ample radial stiffness due to the additional spokes. FREQUENCY HUBS The world's best carbon rims deserved to be paired with high-quality hubs that further improve the performance of a lightweight, dependable carbon wheelset. Frequency hubs feature a low-drag, 6-pawl design that alternates contact between two sets of 3-pawl groupings to provide a responsive 5 degrees of freehub engagement. Frequency hubs laced to CZR i23 wheels feature lightweight pawl springs that minimize drag and therefore improve efficiency for drop-bar usage. AERODYNAMIC WING SPOKES Pillar racing spokes that are cold-forged into an aerodynamic wing shape that reduces drag at the trailing end of each spoke. As a result, wing spokes improve overall efficiency while still retaining the gram-conscious weights of traditional bladed spokes. SAPIM ALLOY NIPPLES All CZR i23 wheels feature time-tested Sapim alloy nipples to further reduce overall wheel weight while still exceeding the durability requirements of gravel. COUNTLESS CONFIGURATIONS CZR i23 wheels are available in a 24-spoke option for riders looking to minimize weight and increase compliance, while the 28-spoke versions are best for heavier or more aggressive riders who prioritize stiffness and durability. All CZR i23 wheels are available with Centerlock or 6-bolt rotor mounts. CZR i23 front wheels use a 12x100mm Frequency hub, but 15mm end caps are also available separately on our Replacement Hub Parts page. WHY CHOOSE CZR I23? Fast and light CZR i23 gravel wheels were designed to minimize weight and maximize compliance on rough gravel roads. With front-wheel weights starting at 620g and rears at 775g, they also deliver the greatest strength-to-weight ratio of any gravel wheelset on the market. We even stand behind them with our Ride With Confidence Guarantee for those few-and-far-between crash replacement cases. Read below for more info.

CZR i30 wheels were designed to handle it all, which is why they feature a strategically reinforced carbon layup and are hand built using double-butted spokes, brass nipples and high-engagement hubs featuring top-tier bearings and oversized freehub seals to establish themselves as wheels that simply won't quit. Solid Strip & TCS Tape - Durable nylon strip that lies between the rim and tubeless tape to prevent tubeless tape from pushing into the spoke holes and ensures a smooth interface between the tire and rim. The smooth surface makes it easier to mount a tire by preventing air from escaping around the bead at each indent during inflation. Solid Strip also protects the airtight system from puncture in the case of a broken spoke. 3-Cross Lacing & Brass Nipples - Too many companies are trying to save weight by offering "enduro" wheels with 2-cross lacing patterns and inadequate alloy nipples. While those are suitable for XC and light trail usage, there's no replacement for the long-term reliability of a 3-cross lacing pattern with brass nipples holding it all together. Frequency Hub - The world's best carbon rims deserved to be paired with high-quality hubs that further improve the performance of a lightweight, dependable carbon wheelset. Frequency hubs feature a low-drag, 6-pawl design that alternates contact between two sets of 3-pawl groupings to provide a responsive 5 degrees of freehub engagement. Heavy-Duty Pawl Springs - CZR i30 wheels feature heavy-duty pawl springs that engage with greater force to counteract the additional torque caused by sudden cranking on steep trails. We also offer a Light Pawl-Spring Kit that can be purchased separately for CZR i30 riders who prefer a quieter hub with lighter pawl engagement. Usage: Trail, Enduro

The Air-Liner Light is an ultra-fast and light-weight tire insert intended for the performance rider or anyone looking to improve the reliability and performance attributes of their ride. - The Air-liner Light lives by it’s namesake coming in at a scant 55g each and will go unnoticed to even the most finicky XC racer, with no loss in the benefits of using a liner - Improved grip at lower pressure with greater tire stability - Lowered risk of tire burping and the upside of run flat make this the leader in performance tire inserts

- Road racing/training rim based on the Aerohead rim with a wider footprint that allows for a more aerodynamic rim/tire combination when paired with a 23c tire - Tire profile mimics the characteristics of a tubular - Hollow core aluminum with machined sidewalls for improved braking - O/C version: Off center design allows for dramatically improved spoke tension on a dished wheel, the A23 OC allows for a more aerodynamic rim/tire combination when paired with a 23c tire - US made A23 rims now feature a tubeless ready design. Combine that with the new 21mm wide Velotape kit and you have a fool-proof Road and Cyclocross tubeless tire setup

- Tubeless compatible US made aluminum disc-only rim with a 25mm wide aero profile - Specifically tuned to be aerodynamically paired with 23-28c road tires, though a 20mm inner width compliments even the most voluminous gravel and cyclocross tires - Tubeless ready using 24mm Velotape

One of our most popular trike upgrades, adding a 26" rear wheel to your trike gives you plenty of advantages, and looks pretty cool too! The larger wheel allows for greater maximum speeds (by increasing the gear inches). It also makes for a smoother ride, eliminating some of the road noise felt on rough bike paths or gravel roads. The 26" rear wheel works best for those who ride mostly bike paths or roads with a moderate amount of hill climbing. Use on the Tour II requires a Dropout Extension. Does not include cassette. - TerraTrike branded 26" rear wheel kit - Includes CST tire, tube and rim strip - Strong and reliable single-wall rim - Sealed bearing rear hub with high quality Japanese bearings - Shimano 8, 9, 10 speed compatible - Silver hub shell, silver rim and silver spokes

We designed Teravail tubeless tape for no-hassle installation. Its slight stretch allows the tape to easily conform to your rims. The translucent material shows you exactly where the tape makes contact. It's tacky enough to prevent shifting but easy to pull up if needed, and it won't leave residue on your rims. - Teravail Tubeless Tape comes in a variety of widths to fit almost any rim. - Teravail Tubeless Tape is available in a variety of widths and roll lengths. - Ten-meter length is enough for a single layer on approximately four wheels

Tannus Armour Tubeless inserts are the result of years of top level multi-cell foam manufacturing mixed with extensive professional riding experience. At the heart of Tannus is the patented Aither Technology; a multi-cell foam compound that forms the structure of the Armour. The inserts are designed to displace small impacts while offering a spring-like rebound for a smooth yet playful ride. - 3% Faster than standard tubeless - Flexible sidewall stabilizing "Wings" for smoother ride quality, with 50% more vibration damping - 20mm of rim protection - Not a sealant sponge – keeps sealant where it belongs - Easy Installation (5 Minutes, No tools required) - 150g - About as much as a standard tube (a little lighter)

Tannus Armour Tubeless inserts are the result of years of top level multi-cell foam manufacturing mixed with extensive professional riding experience. At the heart of Tannus is the patented Aither Technology; a multi-cell foam compound that forms the structure of the Armour. The inserts are designed to displace small impacts while offering a spring-like rebound for a smooth yet playful ride. - 3% Faster than standard tubeless - Flexible sidewall stabilizing "Wings" for smoother ride quality, with 50% more vibration damping - 20mm of rim protection - Not a sealant sponge – keeps sealant where it belongs - Easy Installation (5 Minutes, No tools required) - 150g - About as much as a standard tube (a little lighter)

- For square taper and flanged. - Fits most cartridge BBs - Shell: 8mm Flanged axle bolt

- Shell: 8mm flanged axle nut - Flanged

- Steel end nut for QR skewers

- Supplies full wheel illumination for 700c/29in wheels and smaller - Approximately 40 hrs of battery life - Water resistant design - Includes 3 (AA) batteries - Sold individually (1 wheel) - Easy to install

Product specs: - Size:24", 26" - Width:39mm - Bead width: 39mm - Inner bead width: 30mm - Section height: 27.5mm - Weight (26"): 760g - Sleeved or welded - Hole count: 32, 36

- Dynamo generator front hub features 3.0-watt headlight power supply - A356 aluminum hub shell with 9mm solid nutted axle (140mm overall axle length) - Choose 70mm or 90mm drum brake (brake levers sold separately) - Light sold separately

The Stolen rim strip features 30mm width and 20" diameter. - Material: PVC - Wheel Size: 20" - Rim Strip Width (mm): 30 mm - Adhesive: No

Heavy duty and extra wide PVC rim strips for maximum tube protection.

The Rampage rear wheel features a sealed bearing hub, 14mm axle and a Rampage double-walled rim. - Includes Stolen PVC rim strip - Brake Compatibility: Rim Brake - Wheel Size: 20" - ISO Diameter: 406 / 20" BMX - Valve: Schrader - Tire Type: Clincher - Axle: 3/8" chromoly (Heat-treated) - Hardware: Steel (17mm wheel nuts) - Hub Shell Bearings: 6000 (x2) Verify bearing number on side of rubber seal - Spokes: 187mm (3X) Black w/ Black Brass nipples - Drilling: 36h only - Weight: 32.5 oz

The Rampage 22-inch front wheel features a sealed front hub with a 3/8" chromoly axle and is laced to a Rampage double-wall rim. It's designed for BMX 100mm wide forks. - Axle: 3/8-inch chromoly - Hardware: Steel (17mm wheel nuts) - Hub shell bearings: 6000 (x2) verify bearing number on side of rubber seal - Drilling: 36H - PVC rim strip included

The Rampage 24-inch front wheel features a sealed front hub with a 3/8" chromoly axle and is laced to a Rampage double-wall rim. It's designed for BMX 100mm wide forks. - Axle: 3/8-inch chromoly - Hardware: Steel (17mm wheel nuts) - Hub shell bearings: 6000 (x2) verify bearing number on side of rubber seal - Includes Stolen PVC rim strip - Drilling: 36H - Includes Stolen PVC rim strip

The Rampage rear wheel rolls on a four-bearing sealed cassette hub with 14mm chromoly axle. It's hand-laced to a 36-hole Rampage double-wall rim, and features a 9T chromoly driver with 3-pawl system. - Axle: 14mm chromoly (heat-treated) - Driver: 1-pc chromoly RHD or LHD - Driver bearings: 6802 (x2), verify bearing number on side of rubber seal - Driver pawls: 3 Pawl - Driver spring: Wraparound (x1) - Hardware: Steel (17mm wheel nuts) - Hub shell bearings: 6902 (x2) verify bearing number on side of rubber seal - Drilling: 36H - Weight: 45.4-ounces

The Rampage rear wheel features a sealed bearing hub, 14mm axle and a Rampage double-walled rim. - Includes Stolen PVC rim strip - Hub/Brake Compatibility: Rim Brake - Wheel Size: 20" - ISO Diameter: 406 / 20" BMX - Valve: Schrader - Tire Type: Clincher - Rear Axle: 14mm Threaded x 110mm - Driver: 1-pc chromoly RHD or LHD - Driver Bearings: 6802 (x2), Verify bearing number on side of rubber seal - Driver Pawls: 3 Pawl - Driver Spring: Wraparound (x1) - Hardware: Steel (17mm wheel nuts) - Hub Shell Bearings: 6902 (x2) Verify bearing number on side of rubber seal - Spokes: 183mm (3X) Black w/Black Brass nipples - Drilling: 36h only - Weight: 45.4 oz

The Rampage rear wheel rolls on a four-bearing sealed cassette hub with 14mm chromoly axle. It's hand-laced to a 36-hole Rampage double-wall rim, and features a 9T chromoly driver with 3-pawl system. - Axle: 14mm chromoly - Driver: 1-pc chromoly RHD, 9T - Driver Bearings: 6802 (x2), verify bearing number on side of rubber seal - Driver Pawls: 3 Pawl - Driver Spring: Wraparound (x1) - Hardware: Steel (17mm wheel nuts) - Hub Shell Bearings: 6902 (x2) verify bearing number on side of rubber seal - Drilling: 36H

The Rampage rear wheel rolls on a four-bearing sealed cassette hub with 14mm chromoly axle. It's hand-laced to a 36-hole Rampage double-wall rim, and features a 10T chromoly driver with 3-pawl system. Its designed for BMX 110mm wide frames. - Axle: 14mm chromoly - Driver: 1-pc chromoly RHD, 10T - Driver bearings: 6802 (x2), verify bearing number on side of rubber seal - Driver pawls: 3 Pawl - Driver spring: Wraparound (x1) - Hardware: Steel (17mm wheel nuts) - Hub shell bearings: 6902 (x2) verify bearing number on side of rubber seal - Drilling: 36H

The Rampage rear wheel rolls on a four-bearing sealed cassette hub with 14mm chromoly axle. It's hand-laced to a 36-hole Rampage double-wall rim, and features a 11T chromoly driver with 3-pawl system.It's designed for BMX 110mm wide frames. - Axle: 14mm chromoly - Driver: 1-pc chromoly RHD, 11T - Driver bearings: 6802 (x2), verify bearing number on side of rubber seal - Driver pawls: 3 pawl - Driver spring: Wraparound (x1) - Hardware: Steel (17mm wheel nuts) - Hub shell bearings: 6902 (x2) verify bearing number on side of rubber seal - Drilling: 36H

The Rampage rear wheel rolls on a four-bearing sealed freecoaster hub with 14mm chromoly axle. It's hand-laced to a 36-hole Rampage double-wall rim, and features a 9T chromoly driver with 3-pawl system. - Axle: 14mm chromoly (heat-treated) - Driver: 1-pc chromoly RHD or LHD - Hardware: Steel(17mm wheel nuts) - Hub shell bearings: 6002 (x1) & 7902 (x1) verify bearing number on side of rubber seal - Drilling: 36H - Weight: 46.4-ounces

Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips.

Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3

The same spoke thread treatment used by Stan's pro wheel builders is now available to everyone. Stan's SRD Spoke Powder fills the threads of the spoke and functions as both a lubricant during assembly and a thread lock once built. Each bottle contains 24g (.8oz) which will treat approximately 300 wheels. The PTFE powder in Stan's SRD Spoke Powder acts as a barrier, keeping the metal of the nipple from bonding to the metal of the spoke and preventing spoke wind up during build or adjustment. In promoting a smoother turning nipple, the powder also ensures more accurate and consistent wheel builds, with less “ping and pop" during and after the build. The powder also fills the threads of the spoke to act as a thread lock that prevents loosening and de-tensioning and is particularly well suited for mechanically locking nipples such as Sapim's Secure Lock. - Improves tension consistency and overall build quality - Prevents spoke wind up - Offers secure thread lock between spoke and nipple - Prevents corrosion between spoke and nipple - Can be used dry or as a slurry - Works great with mechanically locking nipples

Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.

Replacement end caps for Stan's NoTubes rear hubs with XD Driver.

Stan's Enduro Rim Strip converts standard tubed wheels to tubeless so you can reap the benefits. Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's rim strips create a tight seal with the tire bead, reducing the instances of "burping". Plus, you won't miss dealing with flat tires and you'll save money on tubes!